Termination w.r.t. Q proof of TRS/nontermin/CSREx8

Termination w.r.t. Q of the following Term Rewriting System could not be shown:

Q restricted rewrite system:
The TRS R consists of the following rules:

fib(N) → sel(N, fib1(s(0), s(0)))
fib1(X, Y) → cons(X, fib1(Y, add(X, Y)))
add(0, X) → X
add(s(X), Y) → s(add(X, Y))
sel(0, cons(X, XS)) → X
sel(s(N), cons(X, XS)) → sel(N, XS)

Q is empty.

↳ QTRS

  ↳ Overlay + Local Confluence

Q restricted rewrite system:
The TRS R consists of the following rules:

fib(N) → sel(N, fib1(s(0), s(0)))
fib1(X, Y) → cons(X, fib1(Y, add(X, Y)))
add(0, X) → X
add(s(X), Y) → s(add(X, Y))
sel(0, cons(X, XS)) → X
sel(s(N), cons(X, XS)) → sel(N, XS)

Q is empty.

The TRS is overlay and locally confluent. By [15] we can switch to innermost.

↳ QTRS

  ↳ Overlay + Local Confluence

    ↳ QTRS

      ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

fib(N) → sel(N, fib1(s(0), s(0)))
fib1(X, Y) → cons(X, fib1(Y, add(X, Y)))
add(0, X) → X
add(s(X), Y) → s(add(X, Y))
sel(0, cons(X, XS)) → X
sel(s(N), cons(X, XS)) → sel(N, XS)

The set Q consists of the following terms:

fib(x0)
fib1(x0, x1)
add(0, x0)
add(s(x0), x1)
sel(0, cons(x0, x1))
sel(s(x0), cons(x1, x2))

Using Dependency Pairs [1,13] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

FIB1(X, Y) → ADD(X, Y)
ADD(s(X), Y) → ADD(X, Y)
SEL(s(N), cons(X, XS)) → SEL(N, XS)
FIB(N) → SEL(N, fib1(s(0), s(0)))
FIB1(X, Y) → FIB1(Y, add(X, Y))
FIB(N) → FIB1(s(0), s(0))

The TRS R consists of the following rules:

fib(N) → sel(N, fib1(s(0), s(0)))
fib1(X, Y) → cons(X, fib1(Y, add(X, Y)))
add(0, X) → X
add(s(X), Y) → s(add(X, Y))
sel(0, cons(X, XS)) → X
sel(s(N), cons(X, XS)) → sel(N, XS)

The set Q consists of the following terms:

fib(x0)
fib1(x0, x1)
add(0, x0)
add(s(x0), x1)
sel(0, cons(x0, x1))
sel(s(x0), cons(x1, x2))

We have to consider all minimal (P,Q,R)-chains.

↳ QTRS

  ↳ Overlay + Local Confluence

    ↳ QTRS

      ↳ DependencyPairsProof

        ↳ QDP

          ↳ EdgeDeletionProof

Q DP problem:
The TRS P consists of the following rules:

FIB1(X, Y) → ADD(X, Y)
ADD(s(X), Y) → ADD(X, Y)
SEL(s(N), cons(X, XS)) → SEL(N, XS)
FIB(N) → SEL(N, fib1(s(0), s(0)))
FIB1(X, Y) → FIB1(Y, add(X, Y))
FIB(N) → FIB1(s(0), s(0))

The TRS R consists of the following rules:

fib(N) → sel(N, fib1(s(0), s(0)))
fib1(X, Y) → cons(X, fib1(Y, add(X, Y)))
add(0, X) → X
add(s(X), Y) → s(add(X, Y))
sel(0, cons(X, XS)) → X
sel(s(N), cons(X, XS)) → sel(N, XS)

The set Q consists of the following terms:

fib(x0)
fib1(x0, x1)
add(0, x0)
add(s(x0), x1)
sel(0, cons(x0, x1))
sel(s(x0), cons(x1, x2))

We have to consider all minimal (P,Q,R)-chains.
We deleted some edges using various graph approximations

↳ QTRS

  ↳ Overlay + Local Confluence

    ↳ QTRS

      ↳ DependencyPairsProof

        ↳ QDP

          ↳ EdgeDeletionProof

            ↳ QDP

              ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

FIB1(X, Y) → ADD(X, Y)
ADD(s(X), Y) → ADD(X, Y)
SEL(s(N), cons(X, XS)) → SEL(N, XS)
FIB(N) → SEL(N, fib1(s(0), s(0)))
FIB1(X, Y) → FIB1(Y, add(X, Y))
FIB(N) → FIB1(s(0), s(0))

The TRS R consists of the following rules:

fib(N) → sel(N, fib1(s(0), s(0)))
fib1(X, Y) → cons(X, fib1(Y, add(X, Y)))
add(0, X) → X
add(s(X), Y) → s(add(X, Y))
sel(0, cons(X, XS)) → X
sel(s(N), cons(X, XS)) → sel(N, XS)

The set Q consists of the following terms:

fib(x0)
fib1(x0, x1)
add(0, x0)
add(s(x0), x1)
sel(0, cons(x0, x1))
sel(s(x0), cons(x1, x2))

We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [13,14,18] contains 3 SCCs with 3 less nodes.

↳ QTRS

  ↳ Overlay + Local Confluence

    ↳ QTRS

      ↳ DependencyPairsProof

        ↳ QDP

          ↳ EdgeDeletionProof

            ↳ QDP

              ↳ DependencyGraphProof

                ↳ AND

                  ↳ QDP

                    ↳ QDPOrderProof

                  ↳ QDP

                  ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

SEL(s(N), cons(X, XS)) → SEL(N, XS)

The TRS R consists of the following rules:

fib(N) → sel(N, fib1(s(0), s(0)))
fib1(X, Y) → cons(X, fib1(Y, add(X, Y)))
add(0, X) → X
add(s(X), Y) → s(add(X, Y))
sel(0, cons(X, XS)) → X
sel(s(N), cons(X, XS)) → sel(N, XS)

The set Q consists of the following terms:

fib(x0)
fib1(x0, x1)
add(0, x0)
add(s(x0), x1)
sel(0, cons(x0, x1))
sel(s(x0), cons(x1, x2))

We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

SEL(s(N), cons(X, XS)) → SEL(N, XS)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
SEL(x1, x2) = SEL(x2)
s(x1) = s
cons(x1, x2) = cons(x1, x2)

Recursive Path Order [2].
Precedence:

s > SEL₁
cons₂ > SEL₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ Overlay + Local Confluence

    ↳ QTRS

      ↳ DependencyPairsProof

        ↳ QDP

          ↳ EdgeDeletionProof

            ↳ QDP

              ↳ DependencyGraphProof

                ↳ AND

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ PisEmptyProof

                  ↳ QDP

                  ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

fib(N) → sel(N, fib1(s(0), s(0)))
fib1(X, Y) → cons(X, fib1(Y, add(X, Y)))
add(0, X) → X
add(s(X), Y) → s(add(X, Y))
sel(0, cons(X, XS)) → X
sel(s(N), cons(X, XS)) → sel(N, XS)

The set Q consists of the following terms:

fib(x0)
fib1(x0, x1)
add(0, x0)
add(s(x0), x1)
sel(0, cons(x0, x1))
sel(s(x0), cons(x1, x2))

We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ Overlay + Local Confluence

    ↳ QTRS

      ↳ DependencyPairsProof

        ↳ QDP

          ↳ EdgeDeletionProof

            ↳ QDP

              ↳ DependencyGraphProof

                ↳ AND

                  ↳ QDP

                  ↳ QDP

                    ↳ QDPOrderProof

                  ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ADD(s(X), Y) → ADD(X, Y)

The TRS R consists of the following rules:

fib(N) → sel(N, fib1(s(0), s(0)))
fib1(X, Y) → cons(X, fib1(Y, add(X, Y)))
add(0, X) → X
add(s(X), Y) → s(add(X, Y))
sel(0, cons(X, XS)) → X
sel(s(N), cons(X, XS)) → sel(N, XS)

The set Q consists of the following terms:

fib(x0)
fib1(x0, x1)
add(0, x0)
add(s(x0), x1)
sel(0, cons(x0, x1))
sel(s(x0), cons(x1, x2))

We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ADD(s(X), Y) → ADD(X, Y)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
ADD(x1, x2) = x1
s(x1) = s(x1)

Recursive Path Order [2].
Precedence:

trivial

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ Overlay + Local Confluence

    ↳ QTRS

      ↳ DependencyPairsProof

        ↳ QDP

          ↳ EdgeDeletionProof

            ↳ QDP

              ↳ DependencyGraphProof

                ↳ AND

                  ↳ QDP

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ PisEmptyProof

                  ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

fib(N) → sel(N, fib1(s(0), s(0)))
fib1(X, Y) → cons(X, fib1(Y, add(X, Y)))
add(0, X) → X
add(s(X), Y) → s(add(X, Y))
sel(0, cons(X, XS)) → X
sel(s(N), cons(X, XS)) → sel(N, XS)

The set Q consists of the following terms:

fib(x0)
fib1(x0, x1)
add(0, x0)
add(s(x0), x1)
sel(0, cons(x0, x1))
sel(s(x0), cons(x1, x2))

We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ Overlay + Local Confluence

    ↳ QTRS

      ↳ DependencyPairsProof

        ↳ QDP

          ↳ EdgeDeletionProof

            ↳ QDP

              ↳ DependencyGraphProof

                ↳ AND

                  ↳ QDP

                  ↳ QDP

                  ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

FIB1(X, Y) → FIB1(Y, add(X, Y))

The TRS R consists of the following rules:

fib(N) → sel(N, fib1(s(0), s(0)))
fib1(X, Y) → cons(X, fib1(Y, add(X, Y)))
add(0, X) → X
add(s(X), Y) → s(add(X, Y))
sel(0, cons(X, XS)) → X
sel(s(N), cons(X, XS)) → sel(N, XS)

The set Q consists of the following terms:

fib(x0)
fib1(x0, x1)
add(0, x0)
add(s(x0), x1)
sel(0, cons(x0, x1))
sel(s(x0), cons(x1, x2))

We have to consider all minimal (P,Q,R)-chains.